|
|
Electrotest-Rm Resistivity System
Features
- The low-cost and effective device for carrying out of engineering researches.
Combined Resistivity Transmitter and Receiver - all in one small case.
Micro-processor controlled, the keyboard 4x4, LED ("9,9,9,9"), internal flash memory, interface USB
- Wide variety of applications whether your application is groundwater, environmental, archaeology
or resource exploration.
Hydrogeological researches, such as groundwater exploration, migration of ground water pollution.
- Generation and receiving of signals 0 Hz
- Any types of electrodes
- Internal charger
- Internal battery
- Operating temperature: -20°C to +55°C, (waterproof)
«Electrotest-Rm» specifications
| Output Power: | up to 24 W |
| Output Current: | 0,5..200mA |
| Maximum Output Voltage (transmitter): | up to 250 V |
| Input Impedance: | 10 MΩ |
| Input Voltage Range: | up to 15 V |
| Input Resolution: | 10 μV |
| Dynamic Range: | 90 dB |
| Range of definition of parameter q, the kOhm within the limits of 0,001- 99,9 |
| SP Compensation: | 0 to 1 V, automatic |
| Overall Accuracy: | ± 2,0 % |
| Noise Rejection: | 82 db |
| Mode of automatic measurement with the time interval -10s |
| Environmental: | IP67 environmental protection (waterproof) |
| Micro-processor controlled, the indicator (LED): | «9,9,9,9» |
| Memory Capacity: | 2048 readings |
| The keyboard 4x4 |
| Interface: | USB |
| Internal charger |
| Power Supply: | Internal rechargeable batteries (=12V) |
| Connection of the external battery |
| Operating Temperature: | -20°C to +55°C |
| Dimensions: | 216×180×102 mm |
| Weight: | ≈ 2,3 kG (with the internal battery) |
|
  
|
